HP 6125G Command Reference Manual page 189

|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp multicast group to display IPv4 MBGP peer group information.
Examples
# Display the information of the IPv4 MBGP peer group aaa.
<Sysname> display bgp multicast group aaa
BGP peer-group is aaa
Remote AS 200
Type : external
Maximum allowed prefix number: 4294967295
Threshold: 75%
Configured hold timer value: 180
Keepalive timer value: 60
Minimum time between advertisement runs is 30 seconds
Peer Preferred Value: 0
No routing policy is configured
Members:
Peer
2.2.2.1
Table 38 Command output
Field
BGP peer-group
Remote AS
Type
Maximum allowed prefix number
Threshold
Configured hold timer value
Keepalive timer value
Minimum time between advertisement runs
Peer Preferred Value
No routing policy is configured
AS MsgRcvd MsgSent
200 0
OutQ PrefRcv Up/Down
0 0 0 00:00:35 Active
Description
Name of the peer group.
AS number of the peer group.
Type of the peer group: iBGP or eBGP.
Maximum allowed prefix number.
Percentage of received prefixes from the peer group to
maximum prefixes allowed to receive from the peer group;
If the percentage is reached, the system generates alarm
messages.
Holdtime interval.
Keepalive interval.
Minimum interval for route advertisement.
Preferred value specified for the routes from the peer.
No routing policy is configured.
177
State