Examples
# Configure the interface with an IPv6 address of 1 101::1 as a C-BSR.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] c-bsr 1101::1
c-bsr admin-scope (IPv6 PIM view)
Syntax
c-bsr admin-scope
undo c-bsr admin-scope
View
IPv6 PIM view
Default level
2: System level
Parameters
None
Description
Use c-bsr admin-scope to enable IPv6 administrative scoping.
Use undo c-bsr admin-scope to disable IPv6 administrative scoping.
IPv6 administrative scoping is disabled by default.
Related commands: c-bsr and c-bsr scope.
Examples
# Enable IPv6 administrative scoping.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] c-bsr admin-scope
c-bsr hash-length (IPv6 PIM view)
Syntax
c-bsr hash-length hash-length
undo c-bsr hash-length
View
IPv6 PIM view
Default level
2: System level
Parameters
hash-length: Hash mask length, in the range of 0 to 128.
305