Reset Igmp Group Port-Info - HP 6125G Command Reference Manual

mask-length: Subnet mask length of the multicast group address or multicast source address. For a
multicast group address, this argument has an effective value range of 4 to 32. For a multicast source
address, this argument has an effective value range of 0 to 32. The system default is 32 in both cases.
Description
Use reset igmp group to remove dynamic IGMP group entries.
This command cannot remove static IGMP group entries.
Related commands: display igmp group.
Examples
# Remove the dynamic IGMP group entries on all interfaces.
<Sysname> reset igmp group all
# Remove the dynamic IGMP group entries on VLAN-interface 100.
<Sysname> reset igmp group interface vlan-interface 100 all
# Remove the dynamic IGMP group entry for the IGMP group 225.0.0.1 on VLAN-interface 100.
<Sysname> reset igmp group interface vlan-interface 100 225.0.0.1

reset igmp group port-info

Syntax
reset igmp group port-info { all | group-address } [ vlan vlan-id ]
View
User view
Default level
2: System level
Parameters
all: Specifies all the IGMP groups.
group-address: Specifies an IGMP group. group-address is in the range of 224.0.1.0 to
239.255.255.255.
vlan-id: Specifies a VLAN. vlan-id is in the range 1 to 4094.
Description
Use reset igmp group port-info to remove dynamic Layer 2 port entries for IGMP groups.
Layer 2 ports for IGMP groups include member ports and router ports.
This command cannot remove static Layer 2 port entries of IGMP groups.
Related commands: display igmp group port-info.
Examples
# Remove the dynamic Layer 2 port entries for all IGMP groups in all VLANs.
<Sysname> reset igmp group port-info all
# Remove the dynamic Layer 2 port entries for all IGMP groups in VLAN 100.
<Sysname> reset igmp group port-info all vlan 100
# Remove the dynamic Layer 2 port entry for the multicast group 225.0.0.1 in VLAN 100.
<Sysname> reset igmp group port-info 225.0.0.1 vlan 100
86