Default Local-Preference (Ipv6 Mbgp Address Family View) - HP 6125G Command Reference Manual

suppress: Specifies the threshold for a route to be suppressed, in the range of 1 to 20000. A route is
suppressed if its penalty value exceeds this value. The value must be greater than the reuse value. By
default, the value is 2000.
ceiling: Specifies a ceiling penalty value from 1001 to 20000. The value must be greater than the
suppress value. The default is 16000.
route-policy-name: Specifies a routing policy name, a case-sensitive string of 1 to 63 characters.
The arguments half-life-reachable, half-life-unreachable, reuse, suppress, and ceiling are mutually
dependent. After you configure any one of them, you must specify all the others accordingly.
Description
Use dampening to configure IPv6 MBGP route dampening.
Use undo dampening to disable route dampening.
By default, route dampening is not configured.
Related commands: display bgp ipv6 multicast routing-table dampened, display bgp ipv6 multicast
routing-table dampening parameter, display bgp ipv6 multicast routing-table flap-info, reset bgp ipv6
dampening, and reset bgp ipv6 flap-info.
Examples
# In IPv6 MBGP address family view, configure route dampening.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family multicast
[Sysname-bgp-af-ipv6-mul] dampening 10 10 1000 3000 10000

default local-preference (IPv6 MBGP address family view)

Syntax
default local-preference value
undo default local-preference
View
IPv6 MBGP address family view
Default level
2: System level
Parameters
value: Specifies the default local preference, in the range of 0 to 4294967295. The larger the value is,
the higher the preference is.
Description
Use default local-preference to configure the default local preference.
Use undo default local-preference to restore the default.
By default, the default local preference is 100.
Using this command can affect IPv6 MBGP route selection.
360