Display Bgp Multicast Routing-Table - HP 6125G Command Reference Manual

display bgp multicast routing-table

Syntax
display bgp multicast routing-table [ ip-address [ { mask | mask-length } [ longer-prefixes ] ] ] [ | { begin
| exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ip-address: Specifies a destination IP address.
mask: Specifies the network mask, in dotted decimal notation.
mask-length: Specifies the mask length, in the range of 0 to 32.
longer-prefixes: Matches the longest prefix.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp multicast routing-table to display IPv4 MBGP routing information.
Examples
# Display the IPv4 MBGP routing table.
<Sysname> display bgp multicast routing-table
Total Number of Routes: 1
BGP Local router ID is 10.10.10.1
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
Network
*> 40.40.40.0/24
Table 43 Command output
Field
Total Number of
Routes
BGP Local router ID
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
NextHop
20.20.20.1
Description
Total number of routes.
BGP local router ID.
MED LocPrf
184
PrefVal Path/Ogn
0 200 300i