Timer Join-Prune (Pim View) - HP 6125G Command Reference Manual

Parameters
interval: Hello interval in seconds, with an effective range of 1 to 2,147,483,647.
Description
Use timer hello to configure the hello interval globally.
Use undo timer hello to restore the default.
By default, hello messages are sent at the interval of 30 seconds.
Related commands: pim timer hello.
Examples
# Set the global hello interval to 40 seconds.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] timer hello 40

timer join-prune (PIM view)

Syntax
timer join-prune interval
undo timer join-prune
View
PIM view
Default level
2: System level
Parameters
interval: Join/prune interval in seconds, with an effective range of 1 to 2,147,483,647.
Description
Use timer join-prune to configure the join/prune interval globally.
Use undo timer join-prune to restore the default.
By default, the join/prune interval is 60 seconds.
Related commands: pim timer join-prune.
Examples
# Set the global join/prune interval to 80 seconds.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] timer join-prune 80
144