Display Ipv6 Multicast Routing-Table Ipv6-Address - HP 6125G Command Reference Manual

Field
Nexthop
Preference
RelayNextHop
Tag
Neighbour
ProcessID
Interface
Protocol
State
Cost
Tunnel ID
Label
Age

display ipv6 multicast routing-table ipv6-address

Syntax
display ipv6 multicast routing-table ipv6-address prefix-length [ longer-match ] [ verbose ] [ | { begin |
exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ipv6-address: Specifies a destination IPv6 address.
prefix-length: Specifies a prefix length, in the range of 0 to 128.
longer-match: Displays the routes that match the specified prefix.
verbose: Displays both detailed active and inactive routing information permitted by the ACL. Without
this keyword, only the brief information about active routes permitted by the ACL is displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Next hop IP address
Route preference
Recursive next hop
Route tag
Neighbor address
Process ID
Outbound interface
Routing protocol
Status of the route: Active, Inactive, Adv, or NoAdv
Route cost
Tunnel ID
Label
Time elapsed since the route was generated
381