Mld Last-Listener-Query-Interval; Mld Max-Response-Time - HP 6125G Command Reference Manual
Ip multicast
Hide thumbs
Also See for 6125G:
- Command reference manual (410 pages) ,
- Configuration manual (379 pages) ,
- Release note (60 pages)
Table of Contents
Advertisement
Description
Use mld host-tracking to enable the MLD host tracking function on an interface.
Use undo mld host-tracking to disable the MLD host tracking function on an interface
By default, this function is disabled.
Related commands: host-tracking.
Examples
# Enable the MLD host tracking function on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] mld host-tracking
mld last-listener-query-interval
Syntax
mld last-listener-query-interval interval
undo mld last-listener-query-interval
View
Interface view
Default level
2: System level
Parameters
interval: Specifies an MLD last listener query interval in seconds, in the range of 1 to 5.
Description
Use mld last-listener-query-interval to configure the MLD last listener query interval on the current
interface.
Use undo mld last-listener-query-interval to restore the default.
By default, the MLD last listener query interval is 1 second.
Related commands: display mld interface, last-listener-query-interval, and mld robust-count.
Examples
# Set the MLD last listener query interval to 3 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] mld last-listener-query-interval 3
mld max-response-time
Syntax
mld max-response-time interval
undo mld max-response-time
286
Advertisement
Table of Contents
