C-Bsr Scope; C-Rp (Ipv6 Pim View) - HP 6125G Command Reference Manual

[Sysname-pim6] c-bsr priority 5

c-bsr scope

Syntax
c-bsr scope { scope-id | admin-local | global | organization-local | site-local } [ hash-length
hash-length | priority priority ] *
undo c-bsr scope { scope-id | admin-local | global | organization-local | site-local }
View
IPv6 PIM view
Default level
2: System level
Parameters
scope-id: Specifies the value of the scope field, in the range of 3 to 15.
admin-local: Specifies the scope field value as admin-local, which has a scope value of 4.
global: Specifies the scope field value as global, which has a scope value of 14.
organization-local: Specifies the scope field value as organization-local, which has a scope value of 8.
site-local: Specifies the scope field value as site-local, which has a scope value of 5.
hash-length: Specifies the hash mask length of the IPv6 admin-scope zone indicated by the scope value,
in the range of 0 to 128. If you do not specify this argument, the corresponding global setting is used.
priority: Specifies the priority of the C-BSR in the IPv6 admin-scope zone indicated by the scope value,
in the range of 0 to 255. A larger value means a higher priority. If you do not specify this argument, the
corresponding global setting is used.
Description
Use c-bsr scope to configure the C-BSR in the IPv6 admin-scope zone.
Use undo c-bsr scope to remove the C-BSR configuration.
Related commands: c-bsr admin-scope, c-bsr hash-length, and c-bsr priority.
Examples
# Configure local device as the C-BSR of the IPv6 admin-scope zone with a scope value of 14 and set the
C-BSR priority to 10.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] c-bsr scope global priority 10

c-rp (IPv6 PIM view)

Syntax
c-rp ipv6-address [ { group-policy acl6-number | scope scope-id } | priority priority | holdtime
hold-interval | advertisement-interval adv-interval ] *
undo c-rp ipv6-address
308