HP 6125G Command Reference Manual page 69

mask: Specifies the mask of the multicast group address or multicast source address, 255.255.255.255
by default.
mask-length: Specifies the mask length of the multicast group address or multicast source address. For a
multicast group address, the value ranges from 4 to 32. For a multicast source address, the value ranges
from 0 to 32. The default is 32 in both cases.
incoming-interface: Specifies the routing entries where the incoming interface is the specified one.
interface-type interface-number: Specifies an interface by its type and number.
register: Specifies the routing entries where the incoming interface is the specified register interface of
PIM-SM.
all: Specifies all the routing entries in the multicast routing table.
Description
Use reset multicast routing-table to remove multicast routing table entries.
When a multicast routing entry is removed, the associated multicast forwarding entry is also removed.
Related commands: display multicast forwarding-table, display multicast routing-table, and reset
multicast forwarding-table.
Examples
# Remove the multicast routing entry for the multicast group 225.5.4.3.
<Sysname> reset multicast routing-table 225.5.4.3
57