HP 6125G Command Reference Manual page 48

Ip multicast

Hide thumbs Also See for 6125G:

Table of Contents

Use undo source-deny to disable multicast source port filtering.

By default, multicast source port filtering is not enabled.

This command works in both IGMP snooping–enabled VLANs and VLANs with IGMP enabled on their

VLAN interfaces.

# Enable source port filtering for multicast data on interfaces GigabitEthernet 1/0/1 through

GigabitEthernet 1/0/4.

<Sysname> system-view

[Sysname] igmp-snooping

[Sysname-igmp-snooping] source-deny port gigabitethernet 1/0/1 to gigabitethernet 1/0/4

6125 blade switch series