Port isolation configuration commands
display port-isolate group
Syntax
display port-isolate group [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display port-isolate group to display port isolation group information.
Examples
# Display port isolation group information.
<Sysname> display port-isolate group
Port-isolate group information:
Uplink port support: NO
Group ID: 1
Group members:
Ethernet1/0/2
Table 20 Command output
Field
Port-isolate group information
Uplink port support
Group ID
Group members
port-isolate enable
Syntax
port-isolate enable
undo port-isolate enable
Description
Display port isolation group information.
The switch series does not support configuring an uplink
port in the port isolation group.
Isolation group number. It can only be 1.
Isolated ports in the isolation group.
82
Need help?
Do you have a question about the 3100 v2 Series and is the answer not in the manual?