Peer Password - HP 6125G Command Reference Manual

By default, the TTL threshold for a multicast packet to be encapsulated in an SA message is 0.
Related commands: display msdp peer-status.
Examples
# Set the TTL threshold for multicast packets to be encapsulated in SA messages to 10 so that only
multicast data packets whose TTL value is larger than or equal to 10 can be encapsulated in SA
messages and forwarded to the MSDP peer 1 10.10.10.1.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] peer 110.10.10.1 minimum-ttl 10

peer password

Syntax
peer peer-address password { cipher | simple } password
undo peer peer-address password
View
MSDP view
Default level
2: System level
Parameters
peer-address: Specifies an MSDP peer address.
cipher: Specifies a ciphertext password.
simple: Specifies a plaintext password.
password: Specifies the password string. This argument is case sensitive.
• If the simple keyword is specified, the plaintext password comprises 1 to 80 characters.
If the cipher keyword is specified, the ciphertext password comprises 1 to 137 characters.
•
Description
Use peer password to configure an MD5 authentication password for the TCP connection to be
established with an MSDP peer.
Use undo peer password to restore the default.
By default, no MD5 authentication is performed for TCP connections to be established between MSDP
peers.
The MSDP peers involved in the MD5 authentication must have the same authentication method and
password. Otherwise, the authentication fails and the TCP connection cannot be established.
The plaintext password or ciphertext password is saved in cipher text in the configuration file.
Examples
# Configure the MD5 authentication password to aabbcc in plain text for TCP connections to be
established with MSDP peer 10.1.100.1. The configuration on the peer is similar.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] peer 10.1.100.1 password simple aabbcc
157