Startup-Query-Interval (Igmp View) - HP 6125G Command Reference Manual

undo startup-query-count
View
IGMP view
Default level
2: System level
Parameters
value: Startup query count, the number of queries that the IGMP querier sends on startup. The range is
from 2 to 5.
Description
Use startup-query-count to configure the startup query count globally.
Use undo startup-query-count to restore the default.
By default, the startup query count is set to the IGMP querier's robustness variable.
Related commands: igmp startup-query-count and robust-count.
Examples
# Set the startup query count to 3 globally.
<Sysname> system-view
[Sysname] igmp
[Sysname-igmp] startup-query-count 3

startup-query-interval (IGMP view)

Syntax
startup-query-interval interval
undo startup-query-interval
View
IGMP view
Default level
2: System level
Parameters
interval: Startup query interval in seconds, the interval between general queries that the IGMP querier
sends on startup. The range is from 1 to 18000.
Description
Use startup-query-interval to configure the startup query interval globally.
Use undo startup-query-interval to restore the default.
By default, the startup query interval is 1/4 of the "IGMP general query interval".
Related commands: igmp-startup-query-interval and timer query.
Examples
# Set the startup query interval to 5 seconds globally.
<Sysname> system-view
90