Max-Response-Time (Mld View); Mld - HP 6125G Command Reference Manual
Ip multicast
Hide thumbs
Also See for 6125G:
- Command reference manual (410 pages) ,
- Configuration manual (379 pages) ,
- Release note (60 pages)
Table of Contents
Advertisement
Examples
# Set the MLD last listener query interval to 3 seconds globally.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] last-listener-query-interval 3
max-response-time (MLD view)
Syntax
max-response-time interval
undo max-response-time
View
MLD view
Default level
2: System level
Parameters
interval: Specifies the maximum response delay for MLD general query messages in seconds, in the
range of 1 to 25.
Description
Use max-response-time to configure the maximum response delay for MLD general queries globally.
Use undo max-response-time to restore the default.
By default, the maximum response delay for MLD general queries is 10 seconds.
Related commands: display mld interface, mld max-response-time, and timer other-querier-present.
Examples
# Set the maximum response delay for MLD general queries to 8 seconds globally.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] max-response-time 8
mld
Syntax
mld
undo mld
View
System view
Default level
2: System level
Parameters
None
282
Advertisement
Table of Contents
