Display Mld-Snooping Group - HP 6125XLG Command Reference Manual

Blade switch ip multicast command reference
Table of Contents

Advertisement

MLD snooping information: VLAN 10
MLD snooping: Enabled
Drop-unknown: Enabled
Version: 2
Host-aging-time: 260s
Router-aging-time: 260s
Max-response-time: 10s
Last-listener-query-interval: 1s
Table 28 Command output
Field
MLD snooping
Drop-unknown
Version
Host-aging-time
Router-aging-time
Max-response-time
Last-listener-query-interval

display mld-snooping group

Use display mld-snooping group to display information about dynamic MLD snooping forwarding
entries.
Syntax
display mld-snooping group [ ipv6-group-address | ipv6-source-address ] * [ vlan vlan-id ] [ verbose ]
[ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address. The value is in the range of
FFxy::/16 (excluding FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where "x" and "y" represent any
hexadecimal number from 0 to F. If no IPv6 multicast group is specified, this command displays
information about the dynamic MLD snooping forwarding entries for all IPv6 multicast groups.
Description
MLD snooping status:
Enabled.
Disabled.
Status of dropping unknown IPv6 multicast data:
Enabled.
Disabled.
MLD snooping version.
Aging timer for the dynamic member port.
Aging timer for the dynamic router port.
Maximum time for responding to MLD general queries.
Interval for sending MLD multicast-address-specific queries.
98

Advertisement

Table of Contents
loading

Table of Contents