Encap-Data-Enable; Import-Source - HP 6125G Command Reference Manual

Field
Number of source and group, counted by
AS
AS
Number of source
Number of group

encap-data-enable

Syntax
encap-data-enable
undo encap-data-enable
View
MSDP view
Default level
2: System level
Parameters
None
Description
Use encap-data-enable to enable encapsulation of multicast data in SA messages.
Use undo encap-data-enable to restore the default.
By default, an SA message contains only an (S, G) entry. No multicast data is encapsulated in an SA
message.
Examples
# Enable encapsulation of multicast data in SA messages.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] encap-data-enable

import-source

Syntax
import-source [ acl acl-number ]
undo import-source
View
MSDP view
Default level
2: System level
Description
Number of cached (S, G) entries that the AS counted.
AS number. A question mark indicates that the system could not
obtain the AS number.
Number of multicast sources from this AS.
Number of multicast groups from this AS.
152