Hello-Option Lan-Delay (Ipv6 Pim View); Hello-Option Neighbor-Tracking (Ipv6 Pim View) - HP 6125G Command Reference Manual

Description
Use hello-option holdtime to configure the IPv6 PIM neighbor timeout time.
Use undo hello-option holdtime to restore the default.
By default, the IPv6 PIM neighbor timeout time is 105 seconds.
Related commands: pim ipv6 hello-option holdtime.
Examples
# Set the IPv6 PIM neighbor timeout time to 120 seconds globally.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] hello-option holdtime 120

hello-option lan-delay (IPv6 PIM view)

Syntax
hello-option lan-delay interval
undo hello-option lan-delay
View
IPv6 PIM view
Default level
2: System level
Parameters
interval: LAN-delay time in milliseconds, with an effective range of 1 to 32,767.
Description
Use hello-option lan-delay to configure the global value of the LAN-delay time, namely, the period of
time that the device waits before it forwards a received prune message.
Use undo hello-option lan-delay to restore the default.
By default, the LAN-delay time is 500 milliseconds.
Related commands: hello-option override-interval, pim ipv6 hello-option lan-delay, and pim ipv6
hello-option override-interval.
Examples
# Set the LAN-delay time to 200 milliseconds globally.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] hello-option lan-delay 200

hello-option neighbor-tracking (IPv6 PIM view)

Syntax
hello-option neighbor-tracking
undo hello-option neighbor-tracking
329