Peer Ip-Prefix (Mbgp Address Family View) - HP 6125G Command Reference Manual

Use undo peer group to delete a specified peer from a peer group.
By default, no peer is added to a peer group.
Examples
# In IPv4 MBGP address family view, add the peer 10.1.1.1 to the multicast eBGP peer group test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] group test external
[Sysname-bgp] peer test as-number 200
[Sysname-bgp] peer 10.1.1.1 group test
[Sysname-bgp] ipv4-family multicast
[Sysname-bgp-af-mul] peer test enable
[Sysname-bgp-af-mul] peer 10.1.1.1 group test

peer ip-prefix (MBGP address family view)

Syntax
peer { group-name | ip-address } ip-prefix ip-prefix-name { export | import }
undo peer { group-name | ip-address } ip-prefix { export | import }
View
IPv4 MBGP address family view
Default level
2: System level
Parameters
group-name: Specifies an IPv4 MBGP peer group by its name, a string of 1 to 47 characters.
ip-address: Specifies an IPv4 MBGP peer by its IP address.
ip-prefix-name: Specifies an IP prefix list by its name, a string of 1 to 19 characters.
export: Applies the filter to routes outgoing to the specified peer or peer group.
import: Applies the filter to routes from the specified peer or peer group.
Description
Use peer ip-prefix to reference an IP prefix list to filter routes received from or advertised to a peer or a
peer group.
Use undo peer ip-prefix to remove the configuration.
By default, no IP prefix list-based filtering is configured.
Examples
# In IPv4 MBGP address family view, use the IP prefix list 1 to filter routes outgoing to the peer group test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] group test external
[Sysname-bgp] peer test as-number 200
[Sysname-bgp] ipv4-family multicast
[Sysname-bgp-af-mul] peer test enable
206