Peer Sa-Policy - HP 6125G Command Reference Manual

sa-limit: Specifies the maximum number of (S, G) entries that the device can cache, in the range of 1 to
8192.
Description
Use peer sa-cache-maximum to configure the maximum number of (S, G) entries learned from the
specified MSDP peer that the device can cache.
Use undo peer sa-cache-maximum to restore the default.
By default, the device can cache up to 8192 (S, G) entries learned from MSDP peers.
Related commands: display msdp brief, display msdp peer-status, and display msdp sa-count.
Examples
# Enable the device to cache a maximum of 100 (S, G) entries learned from its MSDP peer 125.10.7.6.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] peer 125.10.7.6 sa-cache-maximum 100

peer sa-policy

Syntax
peer peer-address sa-policy { import | export } [ acl acl-number ]
undo peer peer-address sa-policy { import | export }
View
MSDP view
Default level
2: System level
Parameters
import: Filters SA messages from the specified MSDP peer.
export: Filters SA messages that are forwarded to the specified MSDP peer.
peer-address: Specifies an MSDP peer address.
acl-number: Specifies an advanced ACL number, in the range of 3000 to 3999. If you do not provide an
ACL number, all SA messages that carry (S, G) entries are filtered out.
Description
Use peer sa-policy to configure a filtering rule for received or forwarded SA messages.
Use undo peer sa-policy to restore the default.
By default, the switch does not filter SA messages that are received or that will be forwarded. Namely,
all SA messages are accepted and forwarded.
In addition to controlling SA message by using this command, you can also use the import-source
command to configure a filtering rule for creating SA messages.
Related commands: display msdp peer-status and import-source.
Examples
# Configure a filtering rule so that SA messages are forwarded to the MSDP peer 125.10.7.6 only if they
match ACL 3100.
159