Mld-Snooping Host-Tracking - HP 6125G Command Reference Manual

Ip multicast
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

vlan vlan-id: Specifies a VLAN that comprises the port or ports, where vlan-id is in the range of 1 to
4094.
Description
Use mld-snooping host-join to enable simulated joining on a port. Namely, you configure a port as a
simulated member host for the specified IPv6 multicast group or source and group.
Use undo mld-snooping host-join to remove the simulated member host from the specified IPv6 multicast
group or source and group.
By default, this function is disabled.
This command works in both MLD snooping–enabled VLANs and VLANs with MLD enabled on their
VLAN interfaces. The version of MLD on the simulated member host is consistent with the version of MLD
snooping that runs in the VLAN or the version of MLD that runs on the VLAN interface.
The source-ip ipv6-source-address option in the command is meaningful only for MLDv2 snooping. If
MLDv1 snooping is running, the source-ip ipv6-source-address option does not take effect although you
can include source-ip ipv6-source-address in the command.
In Layer 2 Ethernet interface view or Layer 2 aggregate interface view, this command takes effect only if
the interface belongs to the specified VLAN.
Examples
# Configure GigabitEthernet 1/0/1 in VLAN 2 to join (2002::22, FF3E::101) as a simulated host.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping version 2
[Sysname-vlan2] quit
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] mld-snooping host-join ff3e::101 source-ip 2002::22 vlan
2

mld-snooping host-tracking

Syntax
mld-snooping host-tracking
undo mld-snooping host-tracking
View
VLAN view
Default level
2: System level
Parameters
None
Description
Use mld-snooping host-tracking to enable the MLD snooping host tracking function in a VLAN.
236

Advertisement

Table of Contents
loading

This manual is also suitable for:

6125 blade switch series

Table of Contents