Display Multicast Forwarding-Table - HP 6125G Command Reference Manual

mask-length: Specifies the mask length of the multicast group address, in the range of 4 to 32. The default
is 32.
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display multicast boundary to display multicast boundary information on the specified interface or
all interfaces.
Related commands: multicast boundary.
Examples
# Display multicast boundary information on all interfaces.
<Sysname> display multicast boundary
Multicast boundary information
Boundary
224.1.1.0/24
239.2.2.0/24
Table 6 Command output
Field
Multicast boundary information
Boundary
Interface:

display multicast forwarding-table

Syntax
display multicast forwarding-table [ source-address [ mask { mask | mask-length } ] | group-address
[ mask { mask | mask-length } ] | incoming-interface { interface-type interface-number | register } |
outgoing-interface { exclude | include | match } { interface-type interface-number | register } | statistics
| slot slot-number ] * [ port-info ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
source-address: Specifies a multicast source address.
group-address: Specifies a multicast group address, in the range of 224.0.0.0 to 239.255.255.255.
Interface
Vlan1
Vlan2
Description
Multicast boundary
Multicast group that corresponds to the multicast boundary
Boundary interface that corresponds to the multicast boundary
42