Peer Substitute-As (Ipv6 Address Family View); Peer Timer (Ipv6 Address Family View) - HP FlexNetwork 3600 v2 Series Command Reference Manual

Description
Use peer route-update-interval to specify the interval for sending the same update to a peer/peer
group.
Use undo peer route-update-interval to restore the default.
By default, the interval is 15 seconds for the IBGP peer, and 30 seconds for the EBGP peer.
Examples
# Specify the interval for sending the same update to the peer 1:2::3:4 as 10 seconds.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 as-number 100
[Sysname-bgp-af-ipv6] peer 1:2::3:4 route-update-interval 10

peer substitute-as (IPv6 address family view)

Syntax
peer { ipv6-group-name | ipv6-address } substitute-as
undo peer { ipv6-group-name | ipv6-address } substitute-as
View
IPv6 address family view
Default level
2: System level
Parameters
ipv6-group-name: Name of a peer group, a string of 1 to 47 characters.
ipv6-address: IPv6 address of a peer.
Description
Use peer substitute-as to substitute the local AS number for the AS number of a peer/peer group in
the AS_PATH attribute.
Use undo peer substitute-as to remove the configuration.
The substitution is not configured by default.
Examples
# Substitute the local AS number for the AS number of peer 1:2::3:4.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 substitute-as

peer timer (IPv6 address family view)

Syntax
peer { ipv6-group-name | ipv6-address } timer keepalive keepalive hold holdtime
undo peer { ipv6-group-name | ipv6-address } timer
400