Timer Quiet (Radius Scheme View) - HP FlexNetwork 7500 Series Command Reference Manual

Default
The device buffers the RADIUS stop-accounting requests to which no responses have been
received.
Views
RADIUS scheme view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
This command enables the device to buffer a RADIUS stop-accounting request that has no response
after the maximum transmission attempts (set by using the retry command) have been made. The
device resends the buffered request until it receives a server response or when the number of
stop-accounting request transmission attempts reaches the upper limit. If no more attempts are
available, the device discards the request. However, if you have removed an accounting server,
stop-accounting requests destined for the server are not buffered.
Examples
# Enable buffering of RADIUS stop-accounting requests to which no responses have been received.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] stop-accounting-buffer enable
Related commands
display stop-accounting-buffer (for RADIUS)
reset stop-accounting-buffer (for RADIUS)

timer quiet (RADIUS scheme view)

Use timer quiet to set the quiet timer for the servers specified in a RADIUS scheme.
Use undo timer quiet to restore the default.
Syntax
timer quiet minutes
undo timer quiet
Default
The server quiet timer period is 5 minutes in a RADIUS scheme.
Views
RADIUS scheme view
Predefined user roles
network-admin
mdc-admin
Parameters
minutes: Specifies the server quiet period in minutes, in the range of 1 to 255.
Usage guidelines
Make sure the server quiet timer is set correctly.
111