Timer Join-Prune (Pim View) - HP 6125XLG Command Reference Manual

Examples
# Set the global interval for sending hello messages to 40 seconds.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] timer hello 40
Related commands
pim timer hello

timer join-prune (PIM view)

Use timer join-prune to set the global interval for sending join/prune messages.
Use undo timer join-prune to restore the default.
Syntax
timer join-prune interval
undo timer join-prune
Default
The global interval for sending join/prune messages is 60 seconds.
Views
PIM view
Predefined user roles
network-admin
Parameters
interval: Sets the interval (in seconds) for sending join/prune messages, in the range of 0 to 18000. A
value of 0 means that no join or prune messages are sent.
Usage guidelines
You can set the interval for sending join/prune messages in PIM view or interface view. The
configurations made in PIM view are effective on all interfaces, and the configurations made in interface
view are effective on only the current interface. If you set the interval in both PIM view and interface view,
the configuration in interface view always takes precedence.
Examples
# Set the global interval for sending join/prune messages to 80 seconds.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] timer join-prune 80
Related commands
pim timer join-prune
94