Timer Quiet (Radius Scheme View) - HP FlexFabric 7900 Series Command Reference Manual

Syntax
state secondary { accounting | authentication } [ ipv4-address [ port-number ] ] { active | block }
Default
Every secondary RADIUS server specified in a RADIUS scheme is in active state.
Views
RADIUS scheme view
Predefined user roles
network-admin
Parameters
accounting: Sets the status of a secondary RADIUS accounting server.
authentication: Sets the status of a secondary RADIUS authentication server.
ipv4-address: Specifies the IPv4 address of a secondary RADIUS server.
port-number: Service port number of a secondary RADIUS server, a UDP port number in the range of 1
to 65535. The default port number of a secondary accounting server is 1813 and that of a secondary
authentication is 1812.
active: Specifies the active state, the normal operation state.
block: Specifies the blocked state, the out-of-service state.
Usage guidelines
If no IP address is specified, this command changes the status of all configured secondary RADIUS
servers.
If the device finds that a secondary server in active state is unreachable, the device does the following:
• Changes the status of the secondary server to blocked.
Starts a quiet timer for the server.
•
Tries to communicate with another secondary server in active state.
•
When the quiet timer of a server times out, the status of the server automatically changes to active. If you
set the status of the server to blocked before the quiet timer times out, the status of the server cannot
change back to active unless you manually set the status to active. If all configured secondary servers are
unreachable, the device considers the authentication or accounting attempt a failure.
Examples
# Set the status of all the secondary authentication servers in RADIUS scheme radius1 to blocked.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] state secondary authentication block
Related commands
display radius scheme
•
state primary
•

timer quiet (RADIUS scheme view)

Use timer quiet to set the quiet timer for the servers specified in an RADIUS scheme.
48