Maintenance Domains; Maintenance Points - Dell Force10 C150 Configuration Manual

Ftos configuration guide ftos 8.4.2.7 e-series terascale, c-series, s-series (s50/s25)
Hide thumbs Also See for Force10 C150:
Table of Contents

Advertisement

There is a need for Layer 2 equivalents to manage and troubleshoot native Layer 2 Ethernet networks. With
these tools, you can identify, isolate, and repair faults quickly and easily, which reduces operational cost of
running the network. OAM also increases availability and reduces mean time to recovery, which allows for
tighter service level agreements, resulting in increased revenue for the service provider.
In addition to providing end-to-end OAM in native Layer 2 Ethernet Service Provider/Metro networks,
you can also use CFM to manage and troubleshoot any Layer 2 network including enterprise, datacenter,
and cluster networks.

Maintenance Domains

Connectivity Fault Management (CFM) divides a network into hierarchical maintenance domains, as
shown in
A CFM maintenance domain is a management space on a network that is owned and operated by a single
management entity. The network administrator assigns a unique maintenance level (0 to 7) to each domain
to define the hierarchical relationship between domains. Domains can touch or nest but cannot overlap or
intersect as that would require management by multiple entities.
Figure 5-1. OAM Domains
Customer Network

Maintenance Points

Domains are comprised of logical entities called Maintenance Points. A maintenance point is an interface
demarcation that confines CFM frames to a domain. There are two types of maintenance points:
Maintenance End Points (MEPs): a logical entity that marks the end-point of a domain
Maintenance Intermediate Points (MIPs): a logical entity configured at a port of a switch that is an
intermediate point of a Maintenance Entity (ME). An ME is a point-to-point relationship between two
MEPs within a single domain. MIPs are internal to a domain, not at the boundary, and respond to CFM
only when triggered by linktrace and loopback messages. MIPs can be configured to snoop Continuity
Check Messages (CCMs) to build a MIP CCM database.
80
|
802.1ag
Figure
5-1.
Ethernet Access
Service Provider Network
MPLS Core
Provider Domain (6)
Customer Network
MPLS Access

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents