Log Messages In The Logging Buffer; Configuration Task List For System Log Management; Disable System Logging - Dell Force10 C150 Configuration Manual

Log Messages in the Logging Buffer

All error messages, except those beginning with %BOOTUP
Message 1 BootUp Events
%BOOTUP:RPM0:CP %PORTPIPE-INIT-SUCCESS: Portpipe 0 enabled

Configuration Task List for System Log Management

The following list includes the configuration tasks for system log management:
• Disable System Logging on page 62
• Send System Messages to a Syslog Server on page 63

Disable System Logging

By default, logging is enabled and log messages are sent to the logging buffer, all terminal lines, console,
and syslog servers.
Enable and disable system logging using the following commands:
Task
Disable all logging except on the console.
Disable logging to the logging buffer.
Disable logging to terminal lines.
Disable console logging.
62 | System Management
(Message 1), are log in the internal buffer.
Command Syntax
no logging on
no logging buffer
no logging monitor
no logging console
Command Mode
CONFIGURATION
CONFIGURATION
CONFIGURATION
CONFIGURATION