Table of Contents
Advertisement
Command
<N> An integer, 1 - 4.
<channel_list> The channel range is from 0 to 15 in the following format.
<digital
_channel>
POD1 Bits 0 through 7 are turned off.
POD2 Bits 8 through 15 are turned off.
Example
Root Level Commands
BLANk
BLANk
:BLANk {BUS1 | BUS2 | CHANnel<N> | FUNCtion<N> |
HISTogram | WMEMory<N> | <channel_list> |
<digital_channel> | POD1 | POD2}
The :BLANk command turns off an active channel, function, histogram,
waveform memory, or digital channel. The :VIEW command turns them on.
(@1,5,7,9)
channels 1, 5, 7, and 9 are turned off.
(@1:15)
channels 1 through 15 are turned off.
(@1:5,8,14)
channels 1 through 5, channel 8, and channel 14 are turned off.
The digital channels are only available on the MSO oscilloscopes and can be
DIGital0 through DIGtal15
This example turns off digital channels 1 through 5 and digital channel 8.
10
OUTPUT 707;":BLANK (@1:5,8)"
20
END
25-8
Advertisement
Table of Contents
