Programming Procedures; Procedure Organization; Procedure Contents - Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
1 Programming Basics

Programming Procedures

Programming Procedures
The programming procedures provide step-by-step instructions for programming
the communications system. This section details how to make the best use of the
programming procedures.

Procedure Organization

The programming procedures in
organized into logical groups. The programming procedures associated with a
specific aspect of the system are grouped together under one heading. For
example, to assign network services for PRI, you would go to the section titled
''PRI Facilities''
reference, see
procedures based on the menu hierarchy in
for a specific function.

Procedure Contents

Each procedure begins with a general description of the feature, followed by a
summary of programming information that includes the items listed below:
Programmable by
Mode
Idle condition
Planning form
Factory setting
Valid entries
Inspect
Copy option
Console Procedure
PC Procedure
Chapter
and then locate the network services procedure. For quick
''System Programming Hierarchy'' on page 1-22
Indicates who has permission to use the procedure.
Specifies which system mode supports the procedure: Key,
Hybrid/PBX, Behind Switch, or a combination.
Specifies the idle state required before the procedure can
be performed.
Indicates the planning forms that provide information for the
procedure.
Shows the factory settings, if any, for equipment or features
affected by the procedure.
Specifies the characters, numbers, or values accepted
during data entry.
Specifies whether or not the feature status can be verified
using the Inspect feature.
Indicates whether or not the feature can be copied to
another system component once it has been programmed.
Provides a summary of the procedure steps using the
system console.
Provides a summary of the procedure steps using SPM.
1
1
3, ''Programming Procedures," are
Appendix B. It traces the menu path
1
Issue 1
April 1999
1-10
for a list of