Smdr Calls Recorded On Call Report - Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
System Features
Console Display/Instructions
4. Erase the current number of seconds (xxx).
SMDR Minimum Time:
Enter minimum call time
–
(0 255)
xxx
Backspace
Exit
5. Enter the minimum number of seconds to elapse before calls are recorded on the
SMDR reports (nnn = 0 to 255).
6. Save your entry.
7. Return to the System Programming menu.

SMDR Calls Recorded on Call Report

Use this procedure to specify whether SMDR information should be recorded for
both incoming and outgoing non-private network calls or for outgoing non-private
network calls only.
NOTE:
Refer to
program call recording for calls on private network tandem trunks.
Summary: SMDR Calls Recorded on Call Report
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Additional Information
Enter Press Drop.
Dial or type [nnn].
Select Enter.
Select Exit twice.
''SMDR UDP Calls Recorded on Call Report'' on page 3-493
System Manager
All
Not required
8a, System Features
Incoming and outgoing
In/Out, Out Only
No
No
3
3
Issue 1
April 1999
3-487
PC
+ I
Ã
to