Convert - Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
2 Programming with SPM
Using SPM
2. Use the arrow keys to highlight the source (hard disk or floppy) from which you
want to view the reports and press
Please enter file name
Press ESC to Abort.
A list of the current reports appears:
FILENAME.XXX and FILENAME.YYY are from the \spm\reports directory
of the hard disk.
3. Use the arrow keys to highlight the report you want to view and press
The report appears.
To view the next page of a report, press
To view the previous page of a report, press
To return to the beginning of a report, press
To exit from the Browse option and return to the SPM Main Menu,
press

Convert

The Convert option (which can be used remotely) simplifies upgrading from an
earlier release to a current release of the communications system. See
''Upgrading the System'' on page
Lucent Technologies personnel or your authorized dealer.
To convert system programming to Release 7.0 format, version 7.15 or later of
SPM is required. This version can be easily identified by the version number that
appears on the last line of the console simulation window.
Help screens are available to guide you through the Convert procedure.
''SPM Help'' on page
GOTOFLOPPY
FILENAME.XXX
FILENAME.XXX
.
2-58. This procedure should be done only by
2-27.
.
.
.
.
2
Issue 1
April 1999
2-36
.
See