Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual page 250

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
System Operator Positions
Console Display/Instructions
4. Specify the DLC extension as a DLC position.
DLC Operator Positions:
Enter extension
Store All
Backspace
Exit
5. Assign or remove the DLC operator extension.
6. Indicate that you have finished entering all positions.
Additional Information
If no DSS is attached:
SP: "Entering an Extension"
If DSS is attached:
Delete Toggle the red LED on or
off as required. Go to Step 6.
Enter On = extension is currently assigned
Off = extension cannot be assigned
as a DLC position.
Flashing = extension can be assigned
as a DLC position.
Select Enter
or Delete.
You may continue to assign or remove
DLC operator positions by repeating
Steps 4 and 5.
Select Store All.
The session is terminated, and the system
restarts. You must enter system
programming again to continue.
Issue 1
April 1999
3-48
PC
Ã