Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual page 165

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
2 Programming with SPM
Using SPM
5. Observe the updated file selection screen and press
Please select file name
to convert from,
then press Enter.
N: FILENAME.XXX
Press ESC to Abort.
6. View the CONVERT TO screen. Select CONVERT TO release, then press
The sample screen below appears when converting from Release 1.0 or 1.1. The
actual CONVERT TO releases displayed will be dependent upon the release of
the backup file that was selected in Step 4.
Please enter CONVERT TO
release and press Enter.
1.2 1.4
3.0 3.1
4.2 5.0
7.0
Enter Number: x.x
NOTE:
If the CONVERT TO screen is not displayed, an invalid CONVERT FROM
filename was specified. Quit SPM and restart the procedure.
7. Follow the instructions for a floppy or a hard disk.
If the CONVERT TO file will be saved to a floppy disk, go to Step 8.
If the CONVERT TO file will be saved to the hard disk, go to Step 9.
FILENAME.XXX = backup filename
selected in Step 4
N = drive
All characters must be entered as they
appear on the screen, including the
decimal point.
2.0 2.1
4.0 4.1
6.0 6.1
Issue 1
April 1999
2-39
.
.