Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual page 829

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
Print Reports
Allowed Lists Assigned to Extensions
Disallowed Lists
Disallowed Lists Assigned to Extensions
Automatic Route Selection
Tables
Extension Directory
System Directory
Group Page
Extension Information
Group Coverage
Group Calling
Night Service
Call Pickup Groups
Error Logs
Authorization Codes
BRI Information Report
Non-Local Dial Plan
Service Observing Groups
NOTE:
If you select the All option, keep in mind that the reports take from 30
minutes to 6 hours to print depending on the size of the system. You may
want to schedule use of the printer during off-peak hours.
If you select a report for which there is no information, the report header still
prints.
Print reports if you cannot back up your system programming information.
Do not print reports if your system must handle more than 100 calls per hour.
If you are printing from the console, your printer must be connected to the SMDR
port. If you are programming on a PC with SPM, you have the following choices:
Print reports on the SMDR printer (if available).
Print reports on the PC printer.
Issue 1
April 1999
3-627