Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual page 735

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
Remote Access Features
Console Display/Instructions
3. Select an option.
Remote Access (DISA):
Make a selection
LinesTrunks
Non-TIE
TIE Lines
BarrierCode
Exit
4. Select Code Information.
RemoteAccss BarrierCode:
Make a selection
SProg/Maint
Code Info
Restriction
ARS Restrct
Exit
5. Select an option.
BarrierCode Info:
Make a selection
Code Length
Code Entry
Exit
Additional Information
Select Non-TIE
or TIE Lines
AutoQueuing to specify whether barrier codes apply to
non-tie or tie trunks and go to:
l
Requirements Procedure.
Select BarrierCode to change the
barrier code length to edit a barrier code,
and continue with Step 4.
Allow List
DisallowLst
To change the length of the barrier code,
select Code Length and go to:
u
To edit a specific barrier code,
select Code Entry and go to:
n
Establish or Remove Barrier Code
Change Barrier Code Length
Procedure.
Change Barrier Code Procedure.
Issue 1
April 1999
3-533
PC