Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual page 528

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
Optional Extension Features
Console/Display Instructions
4. Save your entry.
5. Enter the pool dial-out code.
Extension xxxx:
Enter pool dialout code
Backspace
Exit
6. Allow or restrict the extension from using the pool dial-out code.
7. Continue to program pool dial-out codes for another extension or go to Step 8.
8. Return to the System Programming menu.
Additional Information
Select Enter.
If you get the Station Busy message,
wait for an idle condition or exit system
programming and try again later.
xxxx = extension entered in Step 3
Delete
Next
Enter Dial or type [nnn].
Select Enter
or Delete.
You may continue to allow or restrict
additional pool dial-out codes from this
extension by repeating Steps 5 and 6.
Select Next.
Return to Step 5 to continue
programming. The next extension is
displayed on Line 1.
Select Exit two times.
Issue 1
April 1999
3-326
PC
Ã