Posted Message - Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
Labeling
Console Display/Instructions
5. Save your entry.
6. Erase the current label (AAAAAAA) if assigned.
L xxx Enter new label
AAAAAAA
Punctuation
Backspace
A '
C -
E .
7. Enter a label for the line or trunk.
8. Save your entry.
9. Return to the System Programming menu.

Posted Message

Use this procedure to add or change existing posted messages. The posted
messages allow callers with display telephones to know why the called extension
does not answer.
Each posted message can have a maximum of 16 characters. Messages 2
through 20 can be changed through programming. Message 1, Do Not Disturb,
cannot be changed.
NOTE:
In Release 6.0 and later systems, posted messages are not supported
across private network systems.
Additional Information
Select Enter.
xxx = number entered in Step 4
Enter
Exit
, B
& D
Space F Press Drop.
Use Punctuation to toggle between
letters and punctuation.
Dial or type the label.
Select Enter.
(Use
Continue to label additional lines/trunks
by repeating Steps 4 through 8.
Select Exit twice.
, not .)
3
Issue 1
April 1999
3-614
PC
+ I
Ã