Calling Restrictions - Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
Optional Extension Features

Calling Restrictions

Use this procedure to change individual extension calling restrictions to one of the
following:
Unrestricted
Restricted from making all outgoing calls
Restricted from making toll calls
!
SECURITY ALERT:
Toll fraud can occur if extensions are not properly restricted. See
of Your System: Preventing Toll Fraud'' on page A-8
information and security procedures.
NOTE:
In Release 6.0 and later systems, outward and toll calling restrictions are
automatically removed when a caller dials an extension in the non-local dial
plan. FRL restrictions still apply. For details, see
Routing'' on page
Summary: Calling Restrictions
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
3-579.
System Manager
All
Extension idle
4b, Analog Multiline Telephone
4d, MLX Telephone
4e, MFM Adjunct: MLX Telephone
4f, Tip/Ring Equipment
5a, Direct-Line Console (DLC): Analog
5b, Direct-Line Console (DLC): Digital
5c, MFM Adjunct: DLC
5d, Queued Call Console (QCC)
Data Form 1a, Modem Data Workstation
Data Form 1b, ISDN Terminal Adapter Data
Workstation
Unrestricted
Unrestricted, Outward restricted, Toll restricted
No
3
in Appendix A
''Uniform Dial Plan
3
Issue 1
April 1999
3-327
''Security
for more