Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual page 657

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
Optional Group Calling Features
Automatic Log In. Used for calling groups that consist of fax machines or
data workstations (also called data hunt groups) to specify that the system
automatically logs in calling group members after a power failure. This
setting can also be used for calling groups consisting of telephones.
Integrated VMI. Used when a voice messaging system that requires
special signaling for integrated operation (for example, MERLIN LEGEND
Mail, Intuity AUDIX, AUDIX Voice Power
Messaging System
to a calling group. The system automatically logs in the group members
after a power failure.
Generic VMI. Used when a voice messaging system that does not need
special signaling is connected to one or more extension jacks assigned to a
calling group. The system automatically logs in the group members after a
power failure.
NOTE:
In Release 3.1 and later, any port programmed as a VMI port is
programmed with:
If the system manager changes a VMI port to non-VMI port, the restrictions are
not turned off. To remove restrictions, the system manager must change them
through system programming.
Summary: Group Type
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
1 Can no longer be ordered
1
) is connected to one or more extension jacks assigned
Outward restriction on.
A factory set FRL of 0 (the most restrictive).
A factory set Disallowed List (List 7) that includes the numbers
frequently associated with fraud.
System Manager
All
Not required
7d, Group Calling
Automatic Log Out
Automatic login, Automatic logout, Integrated VMI,
Generic VMI
No
1 1
, IS II/III , or MERLIN Mail‚ Voice
3
Issue 1
April 1999
3-455