Voice Announce - Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
QCC Optional Features
Console Display/Instructions
7. Assign or remove the group as QCC operator backup.
8. Return to the System Programming menu.

Voice Announce

Use this procedure to enable or disable Voice Announce for the QCC. Voice
Announce is available only on a QCC in Release 4.0 and later.
When Voice Announce is enabled, every QCC in the system has one Voice
Announce Call button, the Call 5 (Ring/Voice) button. All Intercom calls that
originate from a QCC Call 5 (Ring/Voice) button are delivered as Voice Announce
calls.
When Voice Announce is disabled, all Intercom calls originating at the QCC Call
buttons are Intercom Ringing calls.
Summary: Voice Announce
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Additional Information
Select Enter
or Delete.
You may continue to assign or remove
calling groups as QCC operator backups
by repeating Steps 2 and 3.
Select Exit two times.
3
3
System Manager
Hybrid/PBX
Not required
6a, Optional Operator Features
Disabled
Disabled, Enabled
No
No
Operator Queued Call
Enabled or Disabled
Annc
Exit Exit
Issue 1
April 1999
3-403
PC
More
Voice
Enter
or