Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual page 229

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
System Renumbering
Console Display/Instructions
4. Select an item for renumbering.
5. Enter the old extension for the item selected (****) in Step 4.
****:
Enter old **** number
Backspace
Exit
6. Save your entry.
7. Enter the new extension.
**** xxxx:
Enter new **** number
Backspace
Exit
8. Save your entry.
9. Return to the System Programming menu.
Additional Information
Press the button or function key
next to your selection.
If you get the Station Busy message,
wait for an idle connection, or exit
system programming and try again later.
Enter SP: "Entering an Extension"
Select Enter.
**** = item selected in Step 4
xxxx = extension entered in Step 5
Next
Enter SP: "Entering an Extension"
Select Enter
or Next.
If you use Next to renumber the next
item (****) displayed on Line 1, return
to Step 7.
Select Exit two times.
Issue 1
April 1999
3-27
PC
Ã
Ã