Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual page 448

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
PRI Facilities
Console Display/Instructions
4. Enter the pattern to be matched.
5. Continue to assign the pattern to another table or go to Step 6.
6. Save your entry.
7. Return to the System Programming menu.
u
Operator Procedure
Console Display/Instructions
1. Enter the table number (n = 0 to 7).
Special Services Table:
Enter entry number (0–7)
Backspace
Exit
2. Save your entry.
3. Specify the type of operator.
SpecialServ Tbl Entry x:
Choose type of operator
Local Operator
Presubscribed Carrier
No Operator
Exit
Additional Information
Dial or type [nnnn].
Select Next.
Return to Step 3. The next table is
displayed on Line 1.
Select Enter.
Select Exit four times.
Additional Information
Enter Dial or type [n].
Select Enter.
x = number entered in Step 1
Select Local Operator,
Next
Presubscribed Carrier,
Enter or No Operator.
3
Issue 1
April 1999
3-246
PC
Ã
PC
Ã