Using The List Feature Menu - Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
4 Centralized Telephone Programming
Program Extension
Table 4-1.
Feature
System Speed Dial
Transfer
Voice Announce
On
Off
VA on Idle Only
1 System operator feature only.
2 Centralized telephone programming only.
3 Display telephones only. Programming and feature codes are used with analog multiline
telephones only.
4 English only: time is 12-hour (0100-1259) + 2 (A) or 7 (P); French and Spanish: time is 24-hour
(000-2359).
5 MLX telephones only. Cannot be a QCC or CTI link.
6 MLX telephones only.

Using the List Feature Menu

You can use the List Feature menu to select a feature, instead of using a
programming code. When you select ListFeature (or press 0), the first screen
of features appears as shown below.
Select a Feature:
Extension Program xxxx
Find Feature
AccountCode
Auth Code
Auto Dial
AutoLineSel
There are additional feature option screens. Press More to move through the
screens. Press the button or function key that corresponds to your selection. You
can also use the FindFeature option to display alphabetized lists of features
that begin with the letter or letters you select.
Telephone Programming Codes — Continued
6
>
Barge In
Call Waiting
Camp On
Cback Auto
Cback Sel
Programming Code
*24 + code (600–729)
*774
*10
**10
*130
4
xxxx = previously entered extension
Issue 1
April 1999
4-11