Group Calling Member Assignments - Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
Optional Group Features
Console Display/Instructions
3. Select Coverage Delay.
Options:
Make a selection
Unassigned
BehndSwitch
RecallTimer
Rotary
Exit
4. Erase the current number of rings (x).
Coverage Delay:
Enter number rings (1–9)
x
Backspace
Exit
5. Enter the number of rings (n = 1 to 9).
6. Save your entry.
7. Return to the System Programming menu.

Group Calling Member Assignments

Use this procedure to assign or remove an extension to or from a calling group. A
calling group is used to direct calls to a group of people who all handle the same
type of call. A single extension number is assigned to the group and is used by
both inside and outside callers to reach the group.
To reassign an extension to a new calling group, you must remove it from its old
group before programming the new assignment.
Additional Information
Cover Delay
Inter-Digit
Ringing Freq
SecNT Timer
Press Drop.
Enter
Dial or type [n].
Select Enter.
Select Exit.
3
Issue 1
April 1999
3-415
PC
+ I
Ã