Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual page 433

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
PRI Facilities
Console Display/Instructions
4. Erase the current network service (nnnnn).
Dial Plan Rtg Entry xx:
Enter Network Service
(5 digit code of 0,1)
nnnnn
Backspace
Exit
5. Enter the 5-digit code that corresponds to the service selected.
6. Continue to assign the code to another routing entry or go to Step 7.
7. Save your entry.
8. Program additional options by returning to Step 4 of the main procedure or go to
Step 9.
9. Return to the System Programming menu.
Additional Information
xx = number entered in Step 5
Enter Select Drop.
Dial or type [nnnnn].
Select Next.
Return to Step 4. The next dial plan
routing entry is displayed on Line 1.
Select Enter.
Select Exit three times.
Issue 1
April 1999
3-231
PC
+ I
Ã