Test Telephone Number - Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
PRI Facilities

Test Telephone Number

Use this procedure to assign a test line or trunk telephone number for each 100D
module installed in the control unit.
The number assigned to the test line/trunk must be different from the numbers
assigned to other channels in the same B-channel group. It must be identical to
the number provided by the PRI service provider.
Summary: Test Telephone Number
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Procedure: Test Telephone Number
Console Display/Instructions
1. Select the Lines and Trunks menu.
System Programming:
Make a selection
System
SysRenumber
Operator
LinesTrunks
Exit
System Manager
Hybrid/PBX, Key
Not required
3b, Incoming Trunks: DS1 Connectivity (100D module)
Not applicable
Telephone number of up to 12 digits
No
No
LinesTrunks
(1–17)
digits; 0–9)
+ I
0–9)
Additional Information
>
Extensions
Options
Tables
AuxEquip
NightSrvce
3
3
PRI Test TelNum
Drop Dial telephone no. (up to 12
Enter
Enter Exit
Type slot no. (1–17)
Type telephone no. (up to 12 digits;
3
Issue 1
April 1999
3-214
Dial slot no.
Exit
PC