Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual page 704

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
System Features
u
Group Calling Procedure
Console/Display Instructions
1. Enter the extension of the calling group to which calls are to be redirected.
Unassign Calls Grp Call:
Enter extension number
of group
Backspace
Exit
2. Save your entry.
3. Return to the System Programming menu.
Host System Dial Codes for Behind Switch
Use this procedure to assign the host system dial codes for the Transfer,
Conference, and Drop features.
When multiline telephone users press the Transfer, Conference, or Drop button, a
signal is sent to the host service and the communications system features are not
accessed. Assigning dial codes to these features ensures that users can take
advantage of them through the host system.
NOTE:
This procedure applies to Behind Switch mode only.
Summary: Host System Dial Codes for Behind
Switch Mode
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Additional Information
Enter Dial or type [nnnn].
Select Enter.
Select Exit.
System Manager
Behind Switch
Not required
1, System Planning
No host dial codes are assigned
Host system dial code of up to six digits
No
3
Mode3
3
Issue 1
April 1999
3-502
PC
Ã