Display Preference - Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
Optional Extension Features

Display Preference

In Release 6.0 and later systems, use this procedure to specify display
preferences for incoming inside calls or non-local dial plan calls that arrive on PRI
tandem trunks. Non-local dial plan calls that arrive on private networked tandem
tie trunks are not affected; such calls display on the recipient's telephone like
outside calls do—that is, they do not have Calling Party information. For details
about the display content, see the Feature Reference .
Summary: Display Preference
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Procedure: Display Preference
Console Display/Instructions
1. Select the Extensions menu.
System Programming:
Make a selection
System
SysRenumber
Operator
LinesTrunks
Exit
System Manager
Hybrid/PBX
Not required
Non-Local Dial Plan Administration Form in the
Installation Specification
Calling Number
Calling Name, Calling Number, Both
No
Yes
Extensions
Dial extension no.
(Calling Name, Calling Number, or Both)
Exit
Number, or Both)
Additional Information
>
Extensions
Options
Tables
AuxEquip
NightSrvce
3
3
More More
Enter
Exit
Select display option (Calling Name, Calling
3
April 1999
DisplayPref
Select display option
Enter
Type extension no.
Issue 1
3-363
PC