Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual page 547

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
3 Programming Procedures
Optional Extension Features
If an extension with Remote Call Forwarding has one or more personal lines
assigned, that extension can be assigned as the principal user, and calls received
on that line are forwarded to outside numbers.
Line'' on page
NOTES:
!
SECURITY ALERT:
See
Appendix A
fraud with Remote Call Forwarding.
Summary: Remote Call Forwarding
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
3-72.
This feature is not recommended unless you have ground-start trunks.
See ''Disconnect Signaling Reliability'' on page
Ensure that the number of rings for Remote Call Forwarding is less than
the Coverage Delay or the call will not forward.
In Release 6.1 and later systems, use the Forwarding feature.
''Security of Your System: Preventing Toll Fraud'' on page A-8
for more information and security procedures on preventing toll
System Manager
All
Not required
4b, Analog Multiline Telephone
4d, MLX Telephone
4e, MFM Adjunct: MLX Telephone
4f, Tip/Ring Equipment
5a, Direct-Line Console (DLC): Analog
5b, Direct-Line Console (DLC): Digital
5c, MFM Adjunct: DLC
5d, Queued Call Console (QCC)
Data Form 1a, Modem Data Workstation
Data Form 1b, ISDN Terminal Adapter Data
Workstation
Disallowed
Disallowed, allowed
Yes
No
Extensions
on/off or dial ext. no.
See ''Principal User for Personal
3-63.
3
More
Remote Frwd
Enter Exit
Issue 1
April 1999
3-345
in
Toggle LED
Exit